Electric Hoists

Kito ER2 Series 3-Phase Electric Chain Hoists for Heavy-duty Industrial Applications

Engineered and equipped to perform safely and securely in the toughest applications and in the most extreme conditions, and backed by a 10-year/2,000,000-cycle brake warranty, the ER2 Series feature the latest in advanced technology, easy serviceability, and unmatched durability.

All ER2 models represent a new generation of electric chain hoists and all are equipped with the latest technological advances for workplace and worker safety and security. The DC brake replaces the former variable-current brake. Shorter chain links deliver smoother and quieter operation. Choice of lift speeds is greater, and this list of features is merely an introduction. See product literature for greater detail or contact one Multi-Industriel's technical representatives.

• Load capacities: from 1/8 tonne to 20 tonnes (a tonne is approximately 2,205 pounds)
• 3-Phase AC operation: 220, 440, or 575 volts
• Ergonomic push-button control pendant
• Durable upper/lower limit switch stops hoist if chain contacts hoisty body
  
• 1 or 2 lift speeds (based on model)
• Adjustable 2-speed variable frequency drive is standard on 220-volt and 440-volt models
• Count hour meter records run-time hours and starts/stops, facilitates maintenance scheduling
• CSA-approved quick-connects on all cords that connect hoist to pendand, power supply, and motorized trolley
• Extreme-duty TEFC (totally enclosed, fan cooled) motor with cooling fins on all 4 sides of housing, plus thermal overload protection: 360 starts/hour, 60% duty cycle, 60-minute "short time" rated, 36-minute "on time" rated
• Improved load chain and sheave uses shorter link pitch for increased strength and resistance to abrasion, reduces vibration for smoother lift, and extends the life of the hoist
  
• Forged carbon-steel hooks with notched tip and safety-latch interlock, will not fracture under excessive load
• Direct current (DC) fail-safe brake eliminates drag at start, responds immediately at stop
  
• 10-year/2,000,000 cycle gaurantee on brake
• Long-Life friction clutch protects hoist and operator in the event of extreme overload
• Articulating suspension hook
• Single-speed models equipped with mechanical interlocking contactors for reliable and durable operation
• Maintenance-free sealed bearings
• Gears and brake are sealed and so protected from water and dust
• At rated capacity, the load-bearing parts are only stressed to 20% of their capacity (5:1 safety ratio)
• Conforms to ASME B30.16 safety standard
• Conforms to ASME HST-1 performance standard
• Duty rating, all models: ASME-H4
• CSA electrical certification
• IP55 environmental protection
• Operating temperature: -20 C. to +40 C. (approx. -4 F. to 104 F.)

Kito EFS Series Single-phase 110-volt Electric Chain Hoists

Kito's EFS series of single-phase electric chain hoists are economical and easy to maintain and service. These models are perfect for light-duty use (for example, in a workshop), and are designed to easily and safely lift loads between 500 pounds and 4,800 pounds.

• Load capacities: 1/4, 1/2, 1 and 2 tonnes (a tonne is approximately 2,205 pounds)
• Single-phase AC operation at 110 volts
• Single-speed lift
• Load-tested at 125% of rated capacity
  
• At rated capacity, the load-bearing parts are only stressed to 20% of their capacity (5:1 safety ratio)
• Grade 80 case-hardened, nickel-plated, heat-treated alloy steel load chain resists abrasion and corrosion
• Forged carbon-steel hook will not fracture under excessive load
• Advanced, electrically activated fail-safe pull rotor brake never needs adjusting
• Spur gears immersed in oil bath for quiet, smooth operation and longevity
• Chain guide designed for smooth chain travel
• Slip clutch protects against damage from over-load and over-travel
• 360° swivel bottom hook has built-in bearing for easy positioning
• Weather-tight construction resists water and dust
• Conforms to ASME B30.16 safety standard
• Conforms to ASME HST-1 performance standard
• Duty rating, all models: ASME-H4
• CSA electrical certification
• IP55 environmental protection

Kito ED Series Single-phase 110-volt High-speed Portable Electric Chain Hoists

Kito ED series electric chain hoists are engineered for light weight, high-speed lifting, combined with variable speed. ED hoists are easy to service, portable, and are ideal for light, repetitive tasks.

• Load capacities: 100kg, 240kg, 480kg (approximately 220 lb., 530 lb., 1,058 lb.)
• Single-phase AC operation at 110 volts
• Load-tested at 125% of rated capacity
  
• Variable high speeds to 44 feet/minute allows you to choose the right speed for the task at hand
• At rated capacity, the load-bearing parts are only stressed to 20% of their capacity (5:1 safety ratio)
• Grade 80 case-hardened, heat-treated alloy steel load chain resists abrasion and corrosion, delivers uniform high strength
• Forged carbon-steel hook will not fracture under excessive load
• Double braking system includes both mechanical and regenerative brakes for added safety
• Spur gears immersed in oil bath for quiet, smooth operation and longevity
• Chain guide designed for smooth chain travel
• Slip clutch protects against damage from over-travel and over-load
• 360° swivel bottom hook has built-in bearing for easy positioning
• Weather-tight construction resists water and dust
• Compact, portable, and lightweight, ideal for use in close quarters and for travel
• Weather-tight construction resists water and dust
• Conforms to ASME B30.16 safety standard
• Conforms to ASME HST-1 performance standard
• Duty rating, all models: ASME-H4
• CSA electrical certification
• IP44 environmental protection

For immediate assistance with configuration and specifications, quotes, technical support, or an order,
contact us at 1-855-885-6604 or 514-875-6604 (in the Montreal area).